Sherwin Williams Patio Paint for Concrete Driveway

When it comes to enhancing the aesthetic appeal and durability of your concrete driveway, Sherwin Williams Patio Paint is a top choice for homeowners and contractors alike. With it’s wide range of vibrant colors and long-lasting formulation, this versatile paint is specifically designed to withstand the harsh outdoor elements and provide a beautiful finish to concrete surfaces. So, if you're ready to transform your dull, lifeless driveway into a visually stunning focal point, look no further than Sherwin Williams Patio Paint.

What Paint Is Used for Outdoor Concrete?

When it comes to painting outdoor concrete, the most suitable choice is usually epoxy-based or masonry paint. These types of paint are specially designed to withstand the harsh outdoor elements, including wear, weather, and moisture. One popular option is the Rust-oleum 225359 Epoxy Shield paint in gray, which is available on Amazon.

Epoxy-based paint is known for it’s durability and long-lasting performance. It forms a strong bond with the concrete surface, providing excellent protection against cracks, chipping, and fading. Not only does epoxy paint provide a durable finish, but it’s also resistant to chemicals, oil, and other stains that may come into contact with the concrete.

Masonry paint, on the other hand, is specially formulated for use on concrete and masonry surfaces. It contains additives that enhance it’s adhesion and durability, making it an excellent choice for outdoor applications. This type of paint is available in various colors and finishes, allowing you to customize the look of your patio or driveway.

When considering which paint to use for your outdoor concrete, it’s important to consider the specific needs of your project. Factors such as the climate, amount of foot traffic, and level of exposure to the elements should all be taken into account.

How to Maintain and Touch Up Painted Outdoor Concrete Surfaces.

  • Clean the painted concrete regularly to remove dirt and debris.
  • Avoid using harsh chemicals or abrasive cleaners that could damage the paint.
  • Inspect the painted surface regularly for signs of wear or damage.
  • If you notice any cracks or chips in the paint, touch them up immediately to prevent further deterioration.
  • Use a wire brush or sandpaper to gently remove loose or flaking paint before touching up.
  • Apply a primer to the bare spots before painting to ensure proper adhesion.
  • Match the paint color carefully to ensure a seamless touch-up.
  • Use a paintbrush or roller, depending on the size of the area being touched up.
  • Apply thin, even coats of paint and allow each coat to dry before adding additional layers.
  • Consider applying a clear sealant over the touch-up paint to protect it from the elements.
  • Maintain the painted concrete by regularly cleaning and inspecting for any necessary touch-ups.

These specialized paints are designed to adhere to concrete and can withstand the harsh outdoor elements. They’ve a flexible, elastic finish that can accommodate the movement of the concrete without cracking or peeling. By opting for the right type of paint, you can achieve a durable and long-lasting finish on your outdoor concrete surfaces.

Can You Use Regular Paint on Outdoor Concrete?

Choosing the right paint for your outdoor concrete surfaces is crucial to ensure it’s longevity and durability. Regular exterior paint isn’t designed to withstand the unique challenges posed by concrete surfaces, such as expansion and contraction. Using regular paint on outdoor concrete can lead to cracking and peeling, ultimately compromising the appearance and functionality of your driveway or patio.

To avoid these issues, it’s recommended to opt for dedicated driveway paint or masonry paint, also known as “elastomeric” paint. These specialized paints are formulated to withstand the harsh conditions of outdoor concrete surfaces. They offer superior adhesion and flexibility, allowing them to expand and contract with the concrete without cracking or peeling.

Sherwin Williams Patio Paint for Concrete Driveway is an excellent choice for outdoor concrete surfaces. This paint is specifically designed to adhere well to concrete and provide a long-lasting finish. It’s available in a wide range of colors, allowing you to customize your driveway or patio to suit your personal style.

This paint is resistant to fading, chipping, and cracking, ensuring that your driveway will maintain it’s beauty and functionality for years to come.

Furthermore, Sherwin Williams Patio Paint can be tinted to match the color of your choice. This allows you to create a cohesive and aesthetically pleasing look for your outdoor space. Whether you prefer a classic neutral tone or a bold statement color, Sherwin Williams offers a variety of options to suit your taste.

With a wide range of colors available, you can customize your concrete driveway to create a stunning and durable outdoor space.

Before painting concrete, it’s essential to read the directions on the paint container thoroughly. This is because in many cases, the concrete surface needs to undergo special cleaning and/or etching. To prepare the concrete for painting, it’s common to use a cleaner such as trisodium phosphate (TSP) and an etcher like muriatic acid.

Do I Need to Acid Wash Concrete Before Painting?

It’s important to note that not all concrete surfaces will require an acid wash before painting. However, it’s a good idea to read the directions on the container of paint you plan on using before making any purchases. In most cases, special cleaning and/or etching of the concrete surface will be required before painting. This is to ensure proper adhesion and a long-lasting finish.

One common cleaner used for prepping concrete surfaces is trisodium phosphate (TSP). This powerful cleaner helps remove dirt, grease, and other contaminants that may hinder the paints adherence. TSP can usually be found at hardware or home improvement stores.

In addition to cleaning, etching the concrete is often recommended. This is done using a solution of muriatic acid, which can also be purchased at stores specializing in construction supplies. Etching creates a slightly rougher surface, allowing the paint to bond effectively.

Before applying any acid wash or cleaner, it’s crucial to take safety precautions. Always wear appropriate protective gear, such as gloves, goggles, and a mask, to avoid any contact with the skin or eyes. It’s also essential to follow the instructions provided by the manufacturer carefully to ensure proper usage.

However, in most cases, cleaning the surface with trisodium phosphate and etching with muriatic acid will help create a suitable surface for paint adhesion. Always prioritize safety and follow the directions provided to achieve the best results.

Tips and Tricks for Properly Cleaning Concrete Surfaces Before Painting

Before painting a concrete surface, it’s crucial to properly clean it to ensure a smooth and lasting finish. Here are some tips and tricks for cleaning concrete surfaces effectively:

1. Remove any loose debris or dirt by sweeping the surface with a broom or using a leaf blower. This will prevent the paint from adhering to loose particles.

2. Use a power washer or hose with a high-pressure nozzle to thoroughly clean the concrete. Start from the top and work your way down, ensuring that all areas are covered. This will remove any stubborn stains, mildew, or mold.

3. For tough stains, grease, or oil spots, apply a degreaser or concrete cleaner directly to the affected areas. Scrub the surface with a stiff brush to break up the stains, then rinse it off thoroughly.

4. If there are any cracks or holes in the concrete, it’s essential to repair them before painting. Use a concrete patching compound to fill in the gaps and smooth the surface. Allow the patch to dry completely before proceeding.

5. After cleaning the concrete, allow it to dry completely before applying any paint or primer. Moisture can prevent proper adhesion and result in peeling or bubbling of the paint.

By following these cleaning tips and tricks, you can ensure a clean and well-prepared surface for painting your concrete driveway or patio with Sherwin Williams Patio Paint.

SureCrete’s SureSeal ColorTec Acrylic™ is a popular choice for homeowners looking to add color and durability to their driveways and sidewalks. With it’s high traffic coating, this exterior concrete paint is specifically designed to withstand the wear and tear of daily use. Plus, with a wide range of standard colors to choose from, including gray, silver, white, red, brown, and tan, it’s easy to find the perfect shade to complement your home’s exterior.

Is There a Paint for Driveways?

Yes, there’s definitely a paint option available for driveways. SureCretes SureSeal ColorTec Acrylic™ is a fantastic exterior concrete paint that can be used specifically to add color to driveways and sidewalks. This paint is designed to withstand high traffic, making it perfect for driveways that experience constant vehicle use. With 30 standard color options available, you can choose from a range of shades including gray, silver, white, red, brown, and tan to find the perfect match for your driveway.

When it comes to painting your concrete driveway, it’s important to choose a paint that’s specifically designed for exterior use and can withstand heavy foot and vehicle traffic. SureSeal ColorTec Acrylic™ ticks all these boxes, ensuring that your driveway will remain vibrant and durable for years to come. Additionally, this paint offers excellent adhesion to concrete surfaces, ensuring that it won’t peel or crack easily.

The wide range of color options available with SureSeal ColorTec Acrylic™ means that you can choose a shade that complements the overall aesthetic of your home. Whether you prefer a more neutral color like gray or tan, or want to make a bold statement with red or white, the possibilities are endless.

It can be applied directly to the concrete surface using a brush, roller, or sprayer, making the painting process quick and efficient. This paint also dries relatively quickly, allowing you to use your driveway sooner rather than later.

With it’s range of colors, durability, and ease of application, it’s a great choice for any homeowner looking to enhance their outdoor space. Whether you want to refresh the look of your existing driveway or create a completely new aesthetic, this paint is the perfect solution.

Tips for Preparing and Cleaning a Driveway Before Painting.

  • Remove any loose debris from the driveway using a broom or leaf blower.
  • Sweep the entire surface to ensure it’s free from dirt, dust, and leaves.
  • Use a pressure washer to thoroughly clean the driveway, paying special attention to any oil stains.
  • Apply a driveway cleaner or degreaser to eliminate tough stains and grease marks.
  • Scrub the surface with a stiff brush to further remove any stubborn grime or residue.
  • Rinse the driveway with clean water using the pressure washer or a hose.
  • Let the surface dry completely before proceeding with any painting or sealing.
  • Repair any cracks or potholes with a suitable driveway patching compound.
  • Smooth out the patched areas using a trowel or a putty knife.
  • If necessary, etch the surface with muriatic acid to promote paint adhesion.
  • Apply a high-quality driveway sealer to protect the surface from future damage.
  • Allow the sealer to dry according to the manufacturer’s instructions before using the driveway.

Preparing the concrete surface is essential for achieving long-lasting and visually appealing results when painting directly onto it. Without proper prep work, the paint may not adhere properly or may peel off over time. So, before embarking on any concrete painting project, it’s important to take the necessary steps to ensure a smooth and successful application.

Can I Paint Straight on to Concrete?

Painting concrete is a great way to refresh the look of your driveway or patio. However, you cant just start painting directly onto bare concrete. First, youll need to clean the surface thoroughly to remove any dirt, oil, or grease. Use a pressure washer or strong detergent to ensure that the concrete is completely clean and free of any contaminants.

Next, youll need to prepare the concrete surface for paint by applying a primer. A primer will help the paint adhere better to the concrete and provide a more even and durable finish. Make sure to choose a primer specially formulated for concrete surfaces.

Once the primer is dry, you can start painting. It’s designed specifically for outdoor use and is highly durable and resistant to weathering. It also comes in a wide range of colors, so you can choose the shade that best suits your preferences.

Before applying the paint, make sure to stir it well to ensure an even color and consistency. Then, use a brush or roller to apply the paint to the concrete surface. Start from one end and work your way towards the other, applying a thick, even coat.

Allow the paint to dry completely before applying a second coat, if desired. Be sure to follow the drying time recommended by the manufacturer.

How Long Does Concrete Paint Typically Last?

  • Concrete paint typically lasts for several years, depending on various factors.
  • The quality of the paint and the preparation of the concrete surface are crucial for longevity.
  • Properly applied concrete paint can last anywhere from 5 to 10 years.
  • Factors such as weather exposure, foot traffic, and maintenance can affect the lifespan of the paint.
  • Regular cleaning and recoating can help extend the life of concrete paint.
  • Using a high-quality primer and paint specifically formulated for concrete surfaces is recommended.
  • Consulting with a professional or reading the manufacturer’s guidelines can provide more specific information on the expected lifespan of a particular concrete paint product.
  • It’s important to note that fading, chipping, and peeling may occur over time, especially in high-traffic areas.
  • Regular inspections and touch-ups can help maintain the appearance and durability of concrete paint.


It’s specially formulated formula ensures excellent adhesion and resistance to weathering, abrasion, and fading, making it an ideal choice for outdoor surfaces. With a wide range of color options, it allows homeowners to personalize and beautify their concrete driveways while providing long-lasting protection.

Scroll to Top