How to Block Paving Edging With Cement

Block paving edging is a popular choice for adding a professional and stylish finish to any paving project. However, it’s essential to ensure that the edging is securely fixed in place to prevent any movement or damage. One effective method for achieving this is by using cement to block pave the edging. Just like traditional paving, block paving edging is laid on a mortar bed, which provides stability and strength. The ideal mortar mix for this purpose consists of four parts sharp sand to one part cement. It’s crucial to achieve the right water content in the mixture to create a strong seal with the blocks, ensuring a durable and visually flawless result.

How Do You Secure Block Paving Edges?

Ensuring a secure and long-lasting block paving edge requires the application of a suitable mortar mix. Similar to traditional paving methods, block paving edging should be laid on a firm and even mortar bed, measuring approximately 40mm in depth. The ideal mortar mix for this purpose consists of 4 parts sharp sand blended with 1 part cement.

To begin, it’s crucial to prepare the mortar mix with the right water content. The mixture should be moist enough to create a strong suction, thereby forming a secure seal with the block pavers. However, it’s important to strike a balance and avoid excessive water content, as this can result in a weaker mix that may compromise the stability of the edging.

Using a trowel, carefully apply the mortar mix to the prepared bed area. Ensure an even coverage, approximately 10-15mm thick, to accommodate the block pavers. Take note to regularly check for any inconsistencies or unevenness, as this can affect the overall integrity and appearance of the paved edging.

As you lay the block pavers onto the mortar bed, gently press them down to allow the mix to adhere and create a strong bond. Make sure the pavers are positioned snugly against one another, leaving minimal gaps between each stone. This will help maintain the stability and prevent any shifting or movement over time.

Once the block paving edging is fully laid, it’s recommended to fill the remaining gaps with a selected jointing compound or sand. This will further enhance the stability and aesthetics of the paved area. Lastly, allow sufficient time for the mortar to cure and set before subjecting the paved edging to heavy foot traffic or additional loads.

To secure block paving edging, one effective method is to use a paver. These paving stones, tiles, or bricks made of concrete can be used as exterior flooring. By using a mallet, you can hammer the edging blocks into place at the correct height for your driveway, patio, or pathway. Additionally, creating a haunching on the outside of the edging block, with a minimum width of 75mm, will provide further stability to keep your paved surface securely in place.

How Do You Secure Block Paving Edging?

When it comes to securing block paving edging, one effective method is using a paver. A paver is a paving stone, tile, brick, or brick-like piece of concrete that’s commonly used as exterior flooring. These pavers can be made in a factory by pouring a mixture of concrete and coloring agent into a mold of various shapes, allowing it to set. They’re durable and provide a solid base for your edging.

To secure the edging blocks, start by using a mallet to hammer them into place. This will ensure that the blocks are secure and at the right height for your driveway, patio, or path. Be sure to use enough force to firmly embed the blocks into the ground, but avoid using excessive force that could damage the blocks.

Creating a haunching on the outside of your edging block is also crucial for stability. This involves adding a layer of cement or other suitable material to the outer edge of the block. The haunching should have a minimum width of 75mm to provide adequate support and hold your driveway, patio, or pathway in place.

When applying the haunching, ensure that it’s evenly spread and compacted. This will prevent any gaps or unevenness that could undermine the stability of the edging. Additionally, make sure that the haunching is at the same level as the top of the block to create a seamless and cohesive finish.

Regular maintenance is important to keep your block paving edging secure. Inspect the edging periodically and repair any cracks or loose blocks immediately. This will help prevent further damage and ensure the longevity of your paved area. By following these steps, you can effectively secure your block paving edging and enjoy a well-maintained and durable outdoor space.

The Benefits of Using a Sealant on Block Paving Edging and How to Apply It Properly

  • Enhanced durability and longevity of the block paving
  • Prevents the growth of weeds and grass between the blocks
  • Minimizes color fading caused by UV rays
  • Reduces surface erosion and cracking
  • Improves resistance to oil, grease, and other stains
  • Easy maintenance and cleaning
  • Enhances the overall appearance of the paving
  • Prevents sand loss from jointing
  • Provides a protective barrier against weather elements

To apply the sealant properly:

  1. Clean the block paving thoroughly and remove any weeds, dirt, or debris
  2. Ensure the surface is dry before applying the sealant
  3. Follow the manufacturer’s instructions for the specific sealant product being used
  4. Use a brush or roller to apply an even coat of sealant, taking care not to leave any puddles or excessive buildup
  5. Allow the sealant to dry completely before walking or driving on the paved area
  6. Apply a second coat if recommended by the manufacturer for added protection

Source: How to Lay Edging Kerbs – The New Driveway Company

When it comes to paver edging, using concrete is a viable option. By embedding walls and edging stones into your project using concrete, you can create a strong and durable foundation. Start by removing the first layer of foundation for your pavers and replacing it with concrete. Wet the framing stones with water to ensure better adherence with the concrete, and then proceed with the installation.

Can You Use Concrete for Paver Edging?

When it comes to blocking paving edging with cement, using concrete for the job is definitely an option. Concrete can be a durable and long-lasting material to create edging walls and stones that can be embedded into your project.

Before you begin, it’s important to prepare the area properly. Start by removing the first foundation layer for your pavers. This will create a solid base for your concrete edging.

Next, gather your pavers and ensure they’re clean and free from any debris. Begin by mixing your concrete according to the manufacturers instructions. This will typically involve adding water and stirring until you achieve a smooth consistency.

Once the concrete is mixed, wet the framing stones with water. This will help them adhere better to the concrete. Begin installing the framing stones by placing them securely in the desired position.

As you work, ensure that each stone is level and properly aligned. This will help create a straight and even edging.

Once all the stones are in place, carefully pour the mixed concrete into the gaps between the stones. Use a trowel to smooth and level the concrete, ensuring it fills all the gaps completely.

Allow the concrete to set and cure according to the manufacturers instructions. This will typically involve a waiting period of several hours or even overnight. Once the concrete is fully cured, remove any excess or loose material and clean the area thoroughly.

By using concrete for your paver edging, you can create a strong and sturdy boundary that will help keep your project looking neat and professional for years to come.

Techniques for Achieving a Polished or Decorative Finish on Concrete Edging

  • Staining
  • Stamping
  • Etching
  • Exposed aggregate
  • Polishing
  • Texturing
  • Overlaying
  • Coloring
  • Sealing
  • Scoring

Creating concrete driveway edging involves several steps. Firstly, it’s essential to inspect the edges of your driveway and ensure they’re straight and level. Next, dig trenches along the sides of the driveway to serve as a foundation for the edging. Once the trenches are prepared, mix concrete to a stiff consistency and pour a one-inch layer into the trenches. Finally, while the concrete is still wet, place the desired blocks or edging material against the driveway to create a clean and stylish border.

How Do You Make Concrete Driveway Edging?

When it comes to creating concrete driveway edging, there are a few key steps to follow. First and foremost, it’s important to thoroughly inspect your driveway edges to ensure they’re straight and level. Any inconsistencies or unevenness can affect the overall appearance and functionality of the edging.

After the trenches have been dug, it’s time to mix the concrete. Aim for a stiff consistency, as this will provide the necessary durability and stability for the edging. Once the concrete is mixed, add a one-inch layer to the trench, making sure it’s evenly distributed along the entire length.

As you work your way down the trench, it’s important to place your blocks against the driveway while the concrete is still wet. This will allow the blocks to adhere securely to the concrete, creating a strong and seamless edging. Take your time and ensure each block is properly aligned and leveled for a professional finish.

The finished result shouldn’t only enhance the visual appeal of your driveway but also provide a stable barrier that helps to prevent erosion and maintain the integrity of your pavement.

This process requires attention to detail and careful execution to ensure a level and durable outcome. With patience and the right materials, you can successfully block pave your driveway edges with cement.

When it comes to creating stunning borders for your patio, there are plenty of options to choose from. One popular choice is clay brick edging, which gives a formal and traditional look. Cobble sett borders and porcelain border tiles add a touch of elegance, while rope top edging offers a unique and rustic appeal. You can also consider kerbstones, raised path edging, metal borders, or even a retaining wall for a more distinctive look. With these 15 patio edging ideas, you can transform your outdoor space into a beautiful and inviting oasis.

What Do You Use for Patio Edging?

One of the best options for patio edging is clay brick edging, as it provides a formal and traditional look. It adds a classic touch to your patio and creates a stunning border. The uniformity and durability of clay bricks make them an ideal choice for edging. You can lay them in a straight line or create a decorative pattern to enhance the overall design.

Another popular choice for patio edging is cobble sett borders. These small, rounded stones can be arranged in various patterns, such as herringbone or basketweave, to create a charming and rustic border.

Porcelain border tiles are also an excellent option for patio edging. These tiles come in a wide range of colors and designs, allowing you to create a customized and eye-catching border. Porcelain tiles are durable, resistant to moisture and stains, and perfect for outdoor use.

If you prefer a more decorative and ornate edging, rope top edging is a great choice. This type of edging features a rope-like design that adds a unique and elegant touch to your patio. It can be made from various materials, such as concrete or plastic, and can be easily installed along the perimeter of your patio.

For a more substantial and sturdy edging, kerbstones are an excellent option. These large, heavy stones provide a strong border that can withstand heavy foot traffic and prevent the spreading of pavers. Kerbstones are available in different sizes, shapes, and colors, offering a versatile and durable solution for patio edging.

If you’ve a raised path or stepping stones on your patio, raised path edging can be used to create a neat and defined border. This type of edging is usually made from concrete or stone and is designed to hold the edges of the path in place while adding a decorative touch to your patio.

Metal borders, such as steel or aluminum strips, offer a sleek and modern look for your patio edging. These borders can be easily installed and provide a clean and crisp border that complements various patio designs. Metal borders are also highly durable and resistant to the elements, making them a practical choice for outdoor use.

Lastly, retaining walls can also serve as a functional and attractive edging for your patio. These walls are typically made from stone or concrete and are designed to support and retain the soil while creating a decorative border.

Creating a sturdy and durable driveway edging involves using the right mix of materials. For optimal results, combine 6 measures of small gravel (6 or 10mm) with 3 measures of sharp sand and 1 measure of Ordinary Portland Cement. It’s crucial to blend these dry ingredients thoroughly before gradually adding water until the mixture reaches a consistently damp texture.

What Do You Mix With Concrete for Driveway Edging?

When it comes to blocking paving edging with cement, it’s important to use the right mixture to ensure proper stability and durability. One commonly used mixture includes a combination of small gravel, sharp sand, and Ordinary Portland Cement. The ratio for this blend is typically 6 measures of small gravel (around 6 or 10mm) to 3 measures of sharp sand and 1 measure of cement.

Before beginning the mixing process, it’s crucial to ensure that the dry ingredients are thoroughly incorporated. This can be done by using a sturdy shovel or a mixing paddle attached to a power drill. By thoroughly combining the gravel, sand, and cement, you create a homogeneous blend that will provide solid support for the driveway edging.

Once the dry ingredients are combined, it’s time to add water to the mix. It’s important to add water gradually, a bit at a time, ensuring that the mixture is evenly dampened. Adding too much water at once can result in a runny consistency, which may compromise the stability of the edging. It’s essential to achieve a damp but not watery consistency that will allow the mixture to be formed easily into the desired shape.


A mixture of 4 parts sharp sand to 1 part cement is recommended, with enough water content to create a good suction and seal with the blocks.

Scroll to Top